Jason Bunker
11-18-2008, 04:13 PM
ALL PRICES ARE O.B.O
$2,700- JBR 4 Hole Carbon Fiber Injector Hat (New)
$300- Enderle “K” Valve with 2 Distribution Blocks, All Rubber hoses, and Ultralite Fuel line and a System 1 Fuel Filter.
$350- Enderle 990 Fuel Pump
$350- RCD Belt Guard
$600/each- (2) RCD Front Mount Offset Mag Drives
$600- 14 Sets of Head gaskets (3 New)
$300- (3) CO2 Bottles
$600- RCD Gear Drive w/ Extension
$1,800- Crower Crankshaft 4.125 (4340)
$500- GRP Rods (Used, but checked by GRP-50 Runs)
$900- BME Rods (New)
$500- GRP Rods (29 Runs)
$500- (20) JE Pistons w/ Rings- 4.508- 12.7:1
$500- (4) JE Pistons w/ Rings- 4.508- 10.25:1
$500- (4) JE Pistons- 4.500- 11.7:1
$500- Crower Lifters-.904 Bore
$500/each- (3) Used Mezziere Billet Flexplates, and (1) New
$200- (2) Erson Camshafts
$200- (4) Manton Pushrod Sets for multiple head gasket thick nesses.
$200- Valve Covers. BBC
$2,500- Set of Dart 360 Cylinder Heads w/ Intake. (Milled .100”)
$100/each- (6) Used 14mm Blower Belts
$250/each- (4) New 14mm Blower Belts
$2,800- Bruno Drive Unit.
$3,500- Older Style Lenco CS1 3-Speed. (1.98 1st, 1.44 2nd)
$200/each- (3) RCD Idler Brackets
$1,200- Ford 9” Strange Ultracase (4:30 Gear)
$1,200- Ford9” Strange Ultracase (4:56 Gear)
$200- 7 gal. Aluminum Fuel Cell
$200- (4) Sets of Rod Bearings
$200- (4) Sets of Main Bearings
$200/each- (3) Powermaster Starters
Also have sets of Valve Cover Gaskets, Intake Gaskets, and Exhaust Gaskets too. Call for Pricing.
If interested, give me a call. Ask for Jason. (916) 505-6852
Or E mail me at Jason@LHPRacing.com
$2,700- JBR 4 Hole Carbon Fiber Injector Hat (New)
$300- Enderle “K” Valve with 2 Distribution Blocks, All Rubber hoses, and Ultralite Fuel line and a System 1 Fuel Filter.
$350- Enderle 990 Fuel Pump
$350- RCD Belt Guard
$600/each- (2) RCD Front Mount Offset Mag Drives
$600- 14 Sets of Head gaskets (3 New)
$300- (3) CO2 Bottles
$600- RCD Gear Drive w/ Extension
$1,800- Crower Crankshaft 4.125 (4340)
$500- GRP Rods (Used, but checked by GRP-50 Runs)
$900- BME Rods (New)
$500- GRP Rods (29 Runs)
$500- (20) JE Pistons w/ Rings- 4.508- 12.7:1
$500- (4) JE Pistons w/ Rings- 4.508- 10.25:1
$500- (4) JE Pistons- 4.500- 11.7:1
$500- Crower Lifters-.904 Bore
$500/each- (3) Used Mezziere Billet Flexplates, and (1) New
$200- (2) Erson Camshafts
$200- (4) Manton Pushrod Sets for multiple head gasket thick nesses.
$200- Valve Covers. BBC
$2,500- Set of Dart 360 Cylinder Heads w/ Intake. (Milled .100”)
$100/each- (6) Used 14mm Blower Belts
$250/each- (4) New 14mm Blower Belts
$2,800- Bruno Drive Unit.
$3,500- Older Style Lenco CS1 3-Speed. (1.98 1st, 1.44 2nd)
$200/each- (3) RCD Idler Brackets
$1,200- Ford 9” Strange Ultracase (4:30 Gear)
$1,200- Ford9” Strange Ultracase (4:56 Gear)
$200- 7 gal. Aluminum Fuel Cell
$200- (4) Sets of Rod Bearings
$200- (4) Sets of Main Bearings
$200/each- (3) Powermaster Starters
Also have sets of Valve Cover Gaskets, Intake Gaskets, and Exhaust Gaskets too. Call for Pricing.
If interested, give me a call. Ask for Jason. (916) 505-6852
Or E mail me at Jason@LHPRacing.com